Ключевые слова: power equipment, cables, power transmission lines, cryogenic systems, refrigerator, cooling technology, HTS, compression
Ключевые слова: power equipment, cables, dc performance, grid operation, cryogenic systems, cryocoolers, losses, heat losses, design parameters, HTS, coated conductors
Ключевые слова: HTS, power equipment, cables three-in-one, cryogenic systems, grid operation, pressure drop
Ключевые слова: HTS, power equipment, grid operation, cryogenic systems, cooling technology, cables three-in-one, design parameters, installation
Ключевые слова: HTS, power equipment, cooling technology, cryocoolers, cables three-in-one, Bi2223, test results, YBCO, coated conductors, design parameters
Ключевые слова: HTS, Bi2223, cables three-in-one, heat losses, cooling technology, hybrid systems, current, time evolution, cryogen transfer line, power equipment
Lim J.H., Kim H.R., Jang H.M., Yang H.S., Hwang S.D., Yim S.W., Kim D.L., Kim Y.H., Sohn S.H., LEE S.K., Yang B.M., Won Y.J.
Ключевые слова: HTS, cables three-in-one, YBCO, coated conductors, design parameters, termination, cryogenic systems, power distribution system, power equipment
Ключевые слова: MgB2, bulk, nanodoping, sintering, fabrication, microstructure, grain size, critical caracteristics, Jc/B curves
Ключевые слова: MgB2/Fe, PIT process, ex-situ process, alloying effects, doping effect, critical caracteristics, tapes, Jc/B curves, composition, pinning force, fabrication
Ключевые слова: MgB2/Fe, MgB2/Ti, PIT process, ex-situ process, in-situ process, comparison, nanodoping, critical caracteristics, Jc/B curves, fabrication
Ключевые слова: MgB2/Fe, doping effect, sintering, heat treatment, PIT process, fabrication, Jc/B curves, wires, phase formation, critical caracteristics
Ключевые слова: HTS, Bi2212, bulk, tubes, rods, annealing process, geometry effects, casting process, fabrication, critical current, microstructure, critical caracteristics
Ключевые слова: HTS, YBCO, films, substrate LaAlO3, TFA-MOD process, phase formation, thickness dependence, fabrication
Ключевые слова: HTS, YBCO, TFA-MOD process, thickness dependence, heat treatment, microstructure, substrate LaAlO3, texture, fabrication
Lim J.H., Kim H.R., Hyun O.B., Masuda T., Isojima S., Watanabe M., Yang H.S., YATSUKA K., Hwang S.D., Yim S.W., Ryoo H.S., Kim D.L., Sohn S.H.
Ключевые слова: HTS, YBCO, coated conductors, TFA-MOD process, fabrication, precursors, critical current density, critical caracteristics
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.